Chili Technology offers the ChiliPad Cube, also known simply because ChiliPad, a mattress pad featuring a built-in temperature regulation system that provides both heating and a / c.
The pad is constructed with a central control unit known as the Cube, which is connected to a network of silicone microtubes. ChiliPad owners add hot or cold water, which circulates through the tubes before reaching the Cube. The temperature can be adjusted manually or with a wireless remote; owners can preset the temperature in one degree increments at any place from 55 to 110 Fahrenheit (13 to 43 Celsius).
The ChiliPad is available in a total of seven areas. Four of these sizes Single, Twin XL, Full, and Split California King are single-zone pads, meaning contain one Cube unit and provide one temperature-regulated surface. The other three sizes Queen, King, and Double are dual-zone pads, making them a good option for couples with differing temperature preferences. A Twin-size ChiliPad was previously available, but eventually discontinued due to low demand.
What You Would be wise to Know About The ChiliPad
- The ChiliPad Cube single- and dual-zone mattress pads are most suitable for:
- Single sleepers and couples who experience temperature-related discomfort (either too hot or too cold) during the the evening.
- Homeowners would you like to spend on their hvac bills.
- Pregnant as well as other sleepers with medical conditions that creates excessively hot or excessively cold having sex.
The ChiliPad Cube may not be suitable for:
- Sleepers that do not experience significant temperature-related issues the particular night.
- People who awaken easily a result of noise.
- Those who find mattress pads beneath their fitted sheets uncomfortable.
How Does the ChiliPad Work?
Follow these five steps to operate the ChiliPad Cube:
Secure the mattress pad
The pad should be unfolded and placed along with of the mattress and underneath a fitted sheet. The pad also has elastic corner straps that fit around the perimeters of the mattress for additional stability. The microtubes could be placed at the head or foot belonging to the bed, primarily based on the owner's preferences.
Connect the tube for the cube
chiliPAD The Cube should rest on an apartment surface with at least two feet (24?) of breathing room on either sides. It must be plugged into an AC outlet, and need to be positioned with the water tank on top to prevent leakage. Owners can utilize risers location the Cube beneath their bed. Connect the male end in the external tube attachment towards the Cube's female connector. When connecting the tube into the Cube, the blue release button should be facing moving upward.
Fill the cube with water
The Cube has a dent on the very best in which water ought to added. Unscrew the cap and add distilled water as needed. Once the Cube has reached full water capacity, turn device on making use of the power button near the outlet. The Cube will produce a gentle beep, immediately after which it the tubes will to be able to fill with water. As water is distributed into the tubes, owners will have to add more distilled water to the Cube before add water' indicator light goes for. They should then screw the cap back in place.
Please note: when new, the ChiliPad's water tank should possess a trace regarding water inside; this indicates the product has undergone quality control tests to be able to packaging. If the water is absent, then the ChiliPad might not exactly have been properly proved.
Adjust temperature
Two buttons one with a flame icon and another with a snowflake icon happen to be next towards power button. Owners use these two buttons maximize or reduce the temperature in one-degree increments until their desired setting is contacted. A temperature reading displays the owner's setting, not the ChiliPad's current temperature. Once the temperature is properly adjusted, the number will blink three scenarios. Most temperature changes take effect within quarter-hour.
In addition to manual controls, owners can program temperature settings with a wireless remote. To activate the remote, hold down the Cube's power button for five seconds; the unit will beep and show a blinking 888' on temperature display. Turn on the far off at this point; the boss bv9990 player will beep again and display current temperature preset. To program the remote with a dual-zone pad, make sure one for the Cubes remains off throughout this tactic.
Power off cube as needed
To turn off the Cube, simply press the power button even as it is hurrying. The display will immediately turn off, though the fans may run for a few moments much more time. Owners are advised to unplug the Cube if they do not plan the their ChiliPad in the following 24 plenty of. To drain the Cube, use an H-shaped tool that along with a the ChiliPad; the cross-shaped end is treated to drain theCube, and also the hollow end is used to drain the mattress sleeping pad.
Please keep in mind that dual-zone Chilipads (Queen, King, and California sizes) feature two microtube networks and two Cube moments. To operate these, simply follow the steps listed above for all parties of the information.
Sizing and Pricing
Current prices for all available ChiliPad sizes are listed ultimately table drop some weight .. Please note the pricing differences between pads with the Cube included and replacement pads
ProductNew (Pad and Cube)Replacement (Pad Only)
Single-size ChiliPad Cube (Single-zone)$499$249
Twin XL-size ChiliPad Cube (Single-zone)$599$289
Full-size ChiliPad Cube (Single-zone)$699$299
Queen-size ChiliPad Cube (Dual-zone)$999$379
King-size ChiliPad Cube (Dual-zone)$1,199$399
California King-size ChiliPad Cube (Dual-zone)$1,199$399
Split California King-size ChiliPad Cube (Single-zone)$649$289
Additionally, customers may purchase replacement Cube units for $399.
ChiliPad Features and Specs
The ChiliPad's features, functions, and product specifications add the following:
Temperature range: The Cube can be programmed in one-degree increments to reach temperatures anywhere from 55 to 110 Fahrenheit (13 to 43 Celsius). Certain factors since bedroom temperature and sleeper weight may affect temperature delivery.
Cube dimensions: The Cube measures 9 1/4 wide, 9 1/4 long, and 7 1/2 tall. They weigh roughly nine pounds.
Energy usage: The average ChiliPad uses 80 watts.
Power sources: The Cube's power cord must be plugged into an AC outlet to your job. The remote control requires two AAA battery packs.
Cord length: The cord measures eight feet (8) in proportions.
Material composition: The mattress pad is established from a polyester and cotton blend. The microtubes are associated with medical-grade rubber.
ChiliPad weight limit: The information operates with up to 500 pounds per area. However, heavier individuals won't experience food with caffeine . temperature range as lighter individuals.
ChiliPad dimensions: The table below lists width, length, and thickness dimensions for that ChiliPad each available duration.
ChiliPad SizeZonesDimensions (Width x Length x Height)
Single130W x 75L x 3/4H
Twin Extra Long (XL)138W x 80L x 3/4H
Full153W x 75L x 3/4H
Queen260W x 80L x 3/4H
King276W x 80L x 3/4H
California King272W x 84L x 3/4H
Split California King136W x 84L x 3/4H
What's Included with a ChiliPad Purchase?
The items in a ChiliPad box be contingent on whether a single- or dual-zone pad was obtained a. A full breakdown is listed in the table a number of.
Type of PadNumber of PadsNumber of CubesNumber of RemotesNumber of Drain Keys
Single-zone1111
Dual-zone1211
Additionally, all ChiliPad Cubes come with a user's manual, warranty, and registration card.